Header Ads

Samsung Galaxy J7 (J700F) Flash done with Odin Flash tool (tested)


When i try in FRP Reset then i use miracle box for that but not success and in that was problem of software issue so i use below firmware link then success and i can easy remove frp lock so if you have any type this device then you can use this tutorial because this is tested by me without any error was success but remember before use this tutorial first charged your device battery if low and try in flash then you will be device dead or other issue so please carefully use this tutorial i suggest first read all tutorial carefully after following step by step if any issue using this tutorial then just simple leave your comment on below comment box

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link

J700FXXU1AOFJ_OJV1AOFJ Download here
Odin3_v3.10.7 Download here

Required for flash:

1. Samsung J7 (J700F) device with good battery charged
2. Samsung J7 (J700F) tested flash file
3. Odin3_v3.10.7 Flash tool
4. Micro usb cable
5. Computer or Laptop

Procedure:

1. Download tested firmware or odin flash tool from above link
2. Extract to both files to desktop or as you like path ( must be installed winrar software in your computer or laptop)
3. Open Odin3_v3.10.7 folder and choose Odin3 v3.10.7.exe file
4. Click on BL button and choose BL_J700FXXU1AOFJ_CL679261.....tar.md5 file
5. Click on AP button and choose AP_J700FXXU1AOFJ_CL679261.....tar.md5 file
6. Click on CP button and choose CP_J700FXXU1AOFJ_CL679261.....tar.md5 file
7. Click on CSC button and choose CSC_OJV_J700FOJV1AOFJ..........tar.md5 file
8. Turn Off device (if your device ON)
9. Press and hold Volume Down + Home + Power button for Download Mode
10. Insert usb cable into device (wait until driver installed)
11. Click on Start button
12. Wait until full installed Android system (note : do not try unplug when your device in download mode)
13. Congratulation you are done

Samsung Galaxy J7 (J700F) Flash done with Odin Flash tool screenshot:

Samsung Galaxy J7 (J700F) Flash done with Odin Flash tool Video HERE

No comments

Powered by Blogger.